Premium acoustic slat wall panels, classic wall panels, baseboards, and slat wall accessories — designed for both DIY and professional interior projects.

PrimePulse is our heavyweight line: 21mm total thickness with 9mm of high-density acoustic felt. CorePulse is our standard 9mm panel — slimmer profile, lighter on the wall, lighter on the wallet. If sound dampening is your priority, go PrimePulse. For the slat wall look without the deeper acoustic performance, CorePulse is the move.

Current finishes include Black Lead, Pecan, Sonoma Oak, Palomino, Sandgrau, and Chicago Concrete. Check individual product pages for live stock.

Acoustic slat wall panels are 108" long (around 9 ft) and roughly 4.69" wide. Slat wall accessories (trim and end pieces) are 108x3.5". Baseboards are 96x5".

The panels and slats are made of MDF wrapped in a high-performance decorative film that replicates wood and stone finishes. The backing is acoustic felt, providing sound absorption for acoustic slat wall panels.

They reduce echo, reverberation, and reflected noise — which is what most people actually need. They are not a substitute for soundproofing a wall against outside noise, but they make rooms noticeably quieter, clearer, and more comfortable.

PrimePulse uses 9mm of triple-density acoustic felt — three times the industry-standard 3mm backing. That is a big jump in real-world absorption, especially in mid and high frequencies (voices, TV, music).

Home theaters, podcast and recording spaces, offices, bedrooms, living rooms, restaurants, and any room where speech clarity or reduced echo matters.

Manufactured in Turkey on Italian machinery. MDF and felt are sourced locally in Turkey; the decorative film and adhesive are imported from Germany.

Yes — Class E fire rating, which meets safety standards for residential use.

Yes. The materials are inert once installed. Just keep small fingers and claws away from the felt during install, since adhesives are wet.

Yes — they are designed for DIY. No contractors required. We provide a downloadable PDF guide and video instructions.

At minimum: a level, tape measure, pencil, and either construction adhesive (liquid nails work great) or screws/nails. A fine-tooth saw if you need to cut to length.

Either works. Glue gives the cleanest look. Screws are more forgiving and easier to remove later. For maximum hold (or if you are hanging things on the panels), use both: zigzag bead of adhesive plus a few screws through the felt grooves.

Cut across the slats with a fine-tooth handsaw or circular saw. For the felt backing between slats, a sharp utility knife slices clean through.

Yes. The wall just needs to be clean, dry, flat, and structurally sound. Fill any holes, sand smooth, and prime if possible.

Yes, but you will want furring strips first to give the panels something to fasten into, or use a heavy-duty construction adhesive rated for masonry.

Plan your layout so panels meet trim, ceiling, or baseboard cleanly. A small expansion gap (1/8" or so) is good practice on long runs.

A single accent wall is typically a few hours for one person.

We are a Colorado company with inventory stocked in Longmont, CO. Most orders ship from there — no waiting weeks for overseas freight.

Domestic orders ship quickly from our Colorado warehouse. Specific transit times depend on your location and the carrier — you will see an estimate at checkout.

Contact us before ordering if you are outside the continental US — we will work out shipping options and any duties.

Inspect your order on delivery. If anything is damaged, reach out within a few days with photos and we will make it right.

Light dusting with a soft cloth or a vacuum with a brush attachment. For deeper cleaning, lightly dampen a cloth — do not soak the felt.

Light items, yes — small hooks anchored through the slats into the wall behind work fine. For anything heavy (shelves, TVs), anchor directly into the wall studs through the panel, not into the panel itself.

Reach out and we will point you to the best option for sampling the finish you are considering.

Standard sizes ship from stock. For custom cuts or large project quantities, contact us directly to discuss.

Contact us within 30 days of delivery to start a return. Panels must be unused and in original packaging.

Yes — manufacturing defects are covered.

Email us through the contact form on our site. We are based in Colorado and respond during business hours, Mountain Time.

Yes — get in touch with project details (square footage, finish, timeline) and we will put together a quote.

Reach out — being Colorado-based means we may be able to arrange a sample viewing for local customers or larger projects.